# Robinhood Chain — X 热门讨论 (2026-09-15 22:38 UTC)
## @SWEATY333 (Andrεω ☜) · 09-15 21:20 · ♥92 ↻14 💬48 Bros it’s time to send a meme to Billions.
Robinhood Chain. https://x.com/SWEATY333/status/2099971706819670161
## @serrlavida (serrlav!da💂🏾) · 09-15 18:13 · ♥61 ↻0 💬61 ngl @Kageuri_com has a pretty interesting concept.
4444 shadow merchants coming to Robinhood Chain.
the whole story is built around people who came from the streets, learned the game, made their way through the shadows, then brought part of what they earned back home.
mint: 0.0033 ETH supply: 4444 chain: Robinhood date: TBA
9% of every secondary sale goes back to the guild too.
and the token is set to launch exclusively on @RobinWifHat by @crypto_czar_eth.
still early, so i’m keeping this one on my radar.
KAGEURI · 影売り In shadow we trade. https://x.com/serrlavida/status/2099924470689399023
## @YuChen (YuChen 大王) · 09-15 17:13 · ♥67 ↻5 💬21 速度撸罗宾汉链上的狙击钱包
我撸了接近50刀
流程如下： 第一步：进入官方页面
打开 https://t.co/9IPeCyMlQT，连接支持 Robinhood Chain 的 EVM 钱包
钱包里需要准备少量 ETH，用来支付：
0.0005 ETH 发行费 链上 Gas
这里最重要的不是操作，而是先确认网址
建议从官方账号或 PONS 官方文档进入，不要随便连接别人发来的短链接。
第二步：填写代币资料 如果只是想体验，可以直接围绕自己的 X 账号创建。
其他内容包括： Token Image： 使用自己有权使用的头像或图片 X Profile： 填写自己的 X 用户名 Telegram： 有社区就填，没有可以留空 Paired Asset： 选择 ETH Developer Buy： 新手建议填 0，不要上来就点 Max
需要注意的是，头像会被公开上传到 IPFS
所以提交之前最好检查一下，图片里不要带有地址、联系方式或其他隐私信息。
第三步：设置 Advanced 打开 Advanced 后，普通用户可以先这样设置：
Holder Fee Sharing： 关闭 Creator Wallet： 留空，默认使用当前钱包 Creator Tax： 可以填 2%，也可以保持 0% Snipe Tax Exemptions： 留空
第四步：创建代币 全部检查完成后，点击：Launch Token
钱包会弹出交易确认
第五步：交易代币 创建完成后，可以点击：Trade Token
第六步：领取 Creator Fees 当其他用户产生真实交易后，创作者手续费会逐步累计
进入 Creator Fees 页面，可以看到：
Earned： 累计产生的费用 Claimable： 当前可以领取的金额 Fee Recipient： 接收费用的钱包
只有 Claimable 大于 0 时，再点击：
Claim ETH
领取同样需要钱包签名，并支付链上 Gas。
如果代币刚创建、还没有真实交易量，一般也不会凭空产生可领取费用 https://x.com/YuChen/status/2099909520474677536
## @Genfinity (Generation Infinity) · 09-15 17:20 · ♥60 ↻10 💬11 NEW: X Cashtags Now Link Straight to Kraken
Tap any crypto cashtag on @X in the US and land in a @krakenfx order covering 2,400+ tokens, including @solana and Robinhood Chain assets. https://t.co/cnz1oLpGq3 https://x.com/Genfinity/status/2099911337379762306
## @rimtoln (cryptopsihoz) · 09-15 16:37 · ♥61 ↻0 💬24 FOX BUILT THIS ON ROBINHOOD. I MOVED THE MEMORY TO https://t.co/zQv5nXNeXh
tried his method last night RABIQ on robinhood chain remembers the deployer not the coin you just dug
fox number: 43.9% of pons v2 wallet launches come from someone who already launched before same pain hits pump fun every session
you pull a ca check the deployer, the launch post, watch or pass two days later that wallet mints again and you redo the whole dig from zero because nothing you found lived anywhere
▹ what i ported to pumpfun
paste a pumpfun ca read the onchain factory record deployer, fee path, phase pull fdv, liquidity, volume pull every other mint from that same deployer automatically
save the thesis against the wallet not against the ticker that dies tomorrow
come back later see exactly what moved since last check fresh ca from a deployer i already studied old notes surface on their own
▹ the loop
ca in dossier out memory that carries to the next mint
fox shipped RABIQ-style memory for robinhood i ran that loop on pump fun tape so the board remembers who already printed before i dig them from zero again > 引用 @0xMfox: I built a tool that remembers every deployer on Robinhood Chain so I don't have to.
43.9% of wallet launches on Pons V2 come from someone who already launched before.
Every CA I dig on Pons V2 gets the same treatment. Pull the deployer, check the contract, read the launch post, decide watch or pass.
Two days later the same wallet launches again. I redo the entire thing, because nothing I found the first time lived anywhere I could find it again.
So I built RABIQ. Paste a CA and it:
→ reads the on chain factory record: deployer, fee recipient, phase → pulls FDV, liquidity, volume → pulls every other launch from the same deployer, automatically → saves my thesis and decision against that wallet, not the token
Come back later and it shows exactly what moved since my last check.
Dig a fresh CA from a deployer I already studied, and my old notes surface on their own.
Loop is: CA in, dossier out, memory that carries to the next one.
RABIQ is live right now. What I'm building on top of it is not.
Bookmark this so you know where to check a wallet before you dig it from zero again.
Link to the repo is in the first comment. https://x.com/rimtoln/status/2099900355190358192